Sale!

Ultimate frame press wall mount pull up bar

(4 customer reviews)

$82.60$84.51

  • make certain this fits by means of getting into your model variety.
  • new unique version: gusseted risers deeply guide the bar for the ultimate in balance and strength. Low profile hardware works without problems with bar accessories (offered one at a time). New boxed wall plates growth clearance and set a formidable appearance on your wall.
  • higher exercises: enterprise main 14. Five – 21 inches of wall clearance affords most range of motion. Excessive density foam grips lessen stress for longer workout routines. Padded grip positions at 10, sixteen, 24, and 36 inches helps you to target the results you want.
  • rigid mount: the wall mount pull up bar special edition is rated for 350 lbs to support your most strenuous workouts. A inflexible bar frees you to consciousness on form and repetition so that you can get extra from your exercising time.
  • smooth set up: the wall mount pull up bar is precision engineered for easy home installation on sixteen inch on-center wall studs. Whole hardware, mounting template, instructions and america tech guide are protected.
  • best anchor for optional add-ons: build a complete frame gym with ultimate body press ab straps and gymnastic rings for exceedingly metabolic full frame workout routines and assisted pull up variations. (accessories sold one at a time)
  • recreation kind: exercising & health
Clear
SKU: C1988AOKWE713 Category:

from the manufacturer

unique edition with welded inset bar gussets and box segment wall plates – our most powerful 16″ on-middle bar.

a body in movement imparts kinetic masses on the bar properly past your bodyweight. Welded-in gussets in shape the profile of the bar to distribute those forces over a greater floor area. The gussets higher help the bar while improving the steadiness of the complete body for high energy, distraction-free exercises.

  • consists of united states of america tech help
  • whole meeting commands and mounting hardware are protected
  • 10 yr strong: the wall mount pull up bar is sponsored through remaining body press in opposition to producer’s defects for 10 years
  • wall mount pull up bar unique edition

    introducing the new wall mount pull up bar unique edition by remaining frame press. The special version builds at the high-quality electricity and wall clearance of the original wall mount pull up bar with inset bar gussets and box section wall plates. The inset gussets make the bar a coupled part of the frame to growth energy and rigidity. The box segment wall plates boom wall clearance and power whilst adding an architectural design detail to your gym.

  • new special version is our most powerful 16 inch on-middle bar.
  • inset riser gussets increases the bar capacity and body tension.
  • performance engineered field segment risers increase clearance, help 400lbs and appearance placing in your wall.
  • 14. 5 inches of wall clearance for first rate range of motion
  • non-interference hardware is right for anchoring accessories like ab straps and gymnastic earrings with out chafing. (bought one at a time)
  • outcomes pile on fast with a rigid bar that keeps your recognition on shape and repetition
  • special edition superior features for high-quality overall performance

    bar gussets effectively distribute your exercising forces over a bigger phase of the bar. Higher aid makes the bar stronger and mounting and meeting could not be easier.

    field phase wall plates boom energy and wall clearance whilst giving your health club an extraordinary architectural detail.

    with the pull up bar permit into the risers, the bar turns into a structural a part of the frame and forces to risers to a perfect ninety tiers with the bar. The result is an ultra rigid and robust frame for distraction loose, high intensity workouts.

    approximately remaining frame press

    our ardour is offering health device that helps you to get the most out of your exercises each day. By way of producing high nice low-cost merchandise that look extraordinary and feature past expectation we will create a worthwhile space to your existence for exercise and assist you attain new levels of fitness, nicely being and private performance.

    we price your health and are proud to serve your gymnasium needs. Closing frame press health equipment is backed with united states of america tech support.

    style_name

    Original, Special Edition

    4 reviews for Ultimate frame press wall mount pull up bar

    1. Jim

      Worked great until it gave out on me in the middle of the workout! Is there a warranty!? Read more

    2. D. Matheny

      Your browser does not support HTML5 video. In this video I go over the pieces that come in the box as well as walking through the entire install process. In order to keep the video under the 10 minute limit I had to speed some parts up, but not much. The entire install process took 15 minutes – with an additional 10 minutes for getting out tools and putting them back away. If you don’t watch the video, let me stress that the INSTRUCTIONS ARE WRONG when they say to pre-drill four 7/16″ holes for the lag bolts. You should pre-drill 7/32″ holes instead. That’s a big difference! As far as the bar itself goes, it has turned out to be very solid. I’m 6’7″ and 220lbs – and the bar holds my weight without any problems at all. One reason I went with the wall-mounted bar instead of one that just hangs in a doorway is because of my height, but I also think this looks better than the door-frame versions and you don’t have to worry about damage to the molding or having to store it. I am completely convinced that this bar will last for years. When installed, the bar is 12″ from the wall and is a total of 38″ wide. The front-facing handles stick out about 19.5″ (to the very tips). The center-line of the two supports are exactly 16″ apart – which is great for mounting to typically spaced wall studs (although, you should check where you want to install the bar before ordering). Although I’m very happy with the Ultimate Body Press Pull-Up Bar, I am docking a star for a couple of reasons: 1) The rubber grip on both front-facing handles is messed up due to the way it was packaged. I showed this in the video as well. 2) Although this was easy to install, the instructions are a joke. There are multiple errors that are fairly serious if you were to follow the directions exactly without thinking it through. In some ways, I probably should have docked 2 stars for this since most of us trust the directions to be right and assume they will start making sense on a future step… 3) I should have mentioned it in the video, but I did end up using different lag bolts than the ones that were provided. (You can see the ones I used were silver and the provided bolts were black.) My main concern was ripping the heads off the bolts with my impact driver… Overall, if you are looking for a solid wall-mounted pull-up bar, this is an excellent choice. With just a couple of tools and a few minutes you can have a rock solid bar that is out of the way and should last for years. Now I just need to start improving my pull-up strength! *** UPDATE 6/30/11 *** I’ve been using this bar for a few weeks now and it is working great. One thing I’ve found is that it actually works better for me if I keep my back to the wall and do a pullup ‘behind’ the bar. (Hopefully that makes sense.) If I do pullups while facing the wall, my body actually ends up being a little too far away from the bar because of the way my feet go forward; but, when my back is to the wall, I get that satisfying feeling of my chin going over the bar. Another thing I did at first was to pick up some Iron Woody assisted-pullup bands to help increase my strength. Those bands work great for me and I can tell a huge difference already. I can now do 4 whole pull-ups without the bands! (Don’t laugh…) Read more

    3. Brandon

      Hey all. Writing this as a warning to anyone wanting to install this into a horizontal header instead of vertical studs. I put this above a 4′ wide closet door frame that is also a load bearing wall. There is a 2×12 header installed there, and I hit it with all 4 lag bolts. Plenty strong, I thought! Well…it’s holding. Barely. The wall now flexes where the top bolts pull down on it. I did two pull-ups and stopped because it feels like I may end up twisting the header right out of the wall! So, take my advice and put this thing into some upright studs (or if you do try it in a header, be prepared to move it elsewhere and patch some big holes.) Read more

    4. J7891R

      Where to start. There isn’t too much to say about the product itself. I love the bar. Took me sometime to get it mounted correctly but that is no fault to the product. The mounting bars are spaced 16″ on center. My exterior wall studs are 18″. So do yourself a favor and measure a few times, find out where your studs are, etc. I wound up cutting the drywall out (the width of a stud to minimize patch work). Finding the studs that I had. Turns out they were basically these 2×2 finishing studs fastened to a concrete wall. From there, I cut a 2×4 in to (4) 12″ pieces. About 4″ longer than the support bars. I fastened the first set of studs to the existing studs with 2-1/2″ lag bolts counter sunk. From there I mounted the second set of studs with 4″ lags bolts counter sunk through the first set into the existing stud. Once they were up I mounted the bar. I can tell you, it probably was a bit of overkill. Though, I spackled around the studs, wood puttied the cracks between the studs, and then painted everything. Going on about a month of use, nothing has moved. My only possibly complaint in the future might be with the grips wearing but at this point, I haven’t had any issues. The products is sturdy, built well in my opinion and includes the lags bolts necessary to mount it. I would recommend. Read more

    Add a review

    Your email address will not be published. Required fields are marked *

    Shopping Cart